26. March 2018 | Events & Dates

DiloGroup to present its latest solutions in Turkey

Dilo auf der SINCE
Crosslapper Vector 200
Source: Dilo
International textile producers meet again in Istanbul, Turkey, from April 14 – 17, 2018 on the occasion of the ITM + Hightex Exhibition. Especially in Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. DiloGroup from Eberbach, Germany, with its units DiloSystems, DiloMachines, DiloTemafa and DiloSpinnbau has traditionally taken part in this important exhibition since the first time in 2005.

The group enjoyed above-average order influx in all important markets for its machines and installations and had record turnovers in 2015 and 2016. Due to an increase of about 20 %, the overall turnover in 2016 has reached a total of around 110 million Euros. Also the
lines sold to Hassan and to further well-known Turkish companies in 2017 show the high importance of the Turkish market for the entire DiloGroup.

Nonwoven production lines
The company will inform about complete lines presenting the latest developments in all components. „The strong demand for Dilo production lines is partly due to the high attraction of needled nonwovens themselves with a yearly increase in consumption of about 6 – 7 %. Staple fibre production lines start with fibre preparation – opening and blending – from DiloTemafa, card feeding and cards from DiloSpinnbau and end with crosslappers and needlelooms from DiloMachines,“ reported the manufacturer.

The quality of DiloGroup’s four equipment components, opening and blending, carding, crosslapping and needling, is important to customers. A line stands for highest productivity with best web quality. This goes hand in hand with a high efficiency as the mentioned four machine groups are controlled by a single drive and control technique and fulfill all requirements for modern crosslinking and smart production.

Vector 200 & HyperTex

An example of such an innovation is the “Vector 200”, a new crosslapper which is unique with an infeed speed of more than 200 m/min. The HyperTex installation with the “Turbotex” scrim fabric machine of Messrs. Ontec automation GmbH produces a reinforcing scrim which is fed between two needlefelts and then needled together by a Hyperpunch needleloom. The mesh apertures of this scrim can be varied up to 20 x 20 mm, production speed is up to 40 m/min. The HyperTex installation in a working width of 2.5 m is ready for presentations and trials in the Textile Research Centre in Eberbach, Germany.

Needling technology and carding systems

Furthermore, the manufacturer will inform about universal needling technology and carding systems of wide working width and high web speed for water entanglement lines. For this important, special branch of nonwoven production normal lines have a working width of about 3.8 m
and medium web speeds of around 200 m/min, DiloGroup’s portfolio includes carding systems of wider working width and higher web speeds. Temafa offers in close cooperation with Spinnbau these special carding systems with working widths exceeding 5 m and resultant web speeds of more than 400 m/min after water entanglement and drying.

Reduced draft between card doffing system and winding are essential to achieve a high web uniformity and an acceptable strength ratio in machine direction to cross direction (MD:CD). Spinnbau sets the standard for high productivity with the random roll technology and for
best felt homogeneity by low draft. DiloGroup is very successful with these fibre preparation and carding systems in all nonwoven production lines with high productivity and quality requirements.Further important features of these special installations are the fibre preparation from Temafa, the air technique for card suction, filtration and moistening which result in high line efficiency.

ITM + Hightex Istanbul, hall 9, booth 905A from April 14 – 17, 2018

to top print RSS-Feed